SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Industrial Jibs
Industrial Jib - Forklift jibs enable the individual operating it to reach over obstructions so as to place their very heavy loads on decks, roofs and raised platforms. They're usually utilized to reach through second and even third story doorways or windows to pick up and transfer heaps to places still under construction. Fork truck jibs are actually used to deliver trucks and flatbed trailers, to suspend trusses and laminate wood. Jibs are also typically used for reaching over scaffolding for masonry work.
Every forklift jib attachment is outfitted with two rotating hooks. One of the hooks can be manually fixed on the base of the boom at any position while the second hook stays fixed at the end of the jib. This allows the person operating it to lift stuff that have two hook points. Dependent upon the size of the model, each hook is rated at either 4 thousand or 6 thousand pounds It's possible to use either one hook or even both in order to carry a load. The person operating it should ensure that the entire weight of the jib and the load would not go beyond the rated capacity of the jib as shown on the load chart for that extended or retracted position.
Attachments jibs can be utilized on extendable-reach lift trucks, rough terrain straight-mast lift trucks or on industrial lift trucks. The forklift jib cranes could be fitted onto the forklift by inserting both of the forks into the fork pockets. The back of the jib crane then seats against the rear of the fork and a safety chain wraps the forklift carriage to hold it into place.
Load Capacity for the Jib Boom Forklift Attachment
The load capacity of a forklift jib has a maximum of roughly 1935 pounds to 6000 pounds on either the retracted or extended positions range. You may want to check with a material handling specialist regarding the specific limits of your lift truck use. The load capacity rankings are for the jib itself and not the forklift or the utmost load which can be lifted safely using a particular lift truck. It is important to remember that whenever whichever attachments such as a forklift jib are fitted to the lift truck, the new center of gravity created by the accessory will lessen the general lift capability of the forklift. There are guidelines available that offer details on the way to accurately determine these load limits.
Safe Usage of your Fork Lift Attachment & Fork Trucks
Before utilizing a lift truck jib, make certain that it is properly secured to the forklift with the use of shackles and hooks. Constantly be sure to verify that the screw pins are tight. It is essential to also make sure that the load calculations have been made properly. Bear in mind to take into account the fact that rated capacities occasionally decrease whenever the boom is in an elevated position, every time the boom is extended with telehandlers or even each time the mast is tilted forward.
Important suggestions when utilizing an adjustable jib is not to ever pull a load utilizing this sort of accessory. These kinds of attachments are just designed for vertical raising. Also, refrain from letting the load move to and fro. Utilize extreme caution each time a load is lifted to avoid tipping over the truck.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
LOCAL: 432-614-1756
2000 E 42ND ST C-161
Odessa, Texas
forkliftpartsodessa.com
Email Us
About Us